OBTEN ENVIO GRATIS A PARTIR DE 5,000
19% OFF

KRAMER VP-554X 11x4:2 Presentation Boardroom Router / Scaler System

$152,698.99 $188,233.20
Entregas para el CP:

Opciones de envío

Compartir

The VP−554X is a high−performance presentation scaler/switcher with 4 pairs of independent and scaled outputs. It includes multiple HDMI and HDBaseT inputs – supporting resolutions up to 4K – as well as a legacy VGA input, and each of the 4 outputs is mirrored on both HDMI and HDBT.

VP−554X supports embedded and balanced analog stereo audio, up to 2 microphone inputs, DSP audio features and a built−in stereo power amplifier. It includes a built−in Ethernet switch and supports legacy RS−232, and IR, Ethernet and RS−232 tunneling over HDBT.

Pix–Perfect™ Scaling Technology — Kramer’s precision pixel mapping and high–quality full up — and down–scaling technology.

High–Performance Switcher/Scaler — Scales the video and provides constant output sync to prevent signal disruption when switching between inputs and when no video is detected.

HDCP 2.3 Compliance — The HDCP (High Definition Content Protection) license agreement allows copy–protected data on the HDMI input to pass to HDCP compliant outputs.

Resolutions — Up to 4K60 4:4:4 on the HDMI ports; up to 4K60 4:2:0 on the HDBaseT ports; and up to 1080p60 on the VGA input.

System Range for the HDBT inputs and outputs — Up to 100m for 4K; 180m for 1080p.

4x1 USB Switcher — Can be set to follow the switching of the video layer or as an independent switcher.

Audio DSP Features, including input and output level adjustments, microphone talkover, mixing, and EQ.

Analog & Embedded Audio Support.

Built–in Power Amplifier — 2x20W.

Built–in Video ProcAmp — Color, hue, sharpness, noise, contrast, and brightness.

Option for video wall output mode.

Multiple Control Options — Front panel buttons with OSD, RS–232, Ethernet and built–in Web pages.

Includes numerous filters and algorithms for eliminating picture artifacts.

Converts to 4K60 4:2:0 on HDBaseT outputs when its corresponding mirrored HDMI output resolution is 4K60 4:4:4 (similarly for 4K50).

HDMI Support — HDR10, CEC, xvYCC color (on input), Dolby TrueHD/DTS–HD Master Audio (by–pass), as specified in HDMI 2.0 as specified in HDMI 2.0.

Multiple aspect ratio selections.

Advanced EDID management per input.

Includes non–volatile memory that retains the last settings, after switching the power off and then on again.

STO and RCL buttons, a RESET TO XGA/1080P button (to hardware–reset the output resolution); and a PANEL LOCK button.

Built–in video Proc–Amp — color, hue, sharpness, contrast, and brightness are set individually for each output.

An OSD (On–Screen Display) — for making adjustments — that can be located anywhere on the screen.

Efficient power–saving features.

11 input buttons for switching a selected input to an output.

Scaled video outputs — 4 pairs of mirrored HDMI and HDBT outputs.

Embedded audio on the HDMI and HDBT inputs and outputs.

  • Pix–Perfect™ Scaling Technology — Kramer’s precision pixel mapping and high–quality full up — and down–scaling technology.
  • High–Performance Switcher/Scaler — Scales the video and provides constant output sync to prevent signal disruption when switching between inputs and when no video is detected.
  • HDCP 2.3 Compliance — The HDCP (High Definition Content Protection) license agreement allows copy–protected data on the HDMI input to pass to HDCP compliant outputs.
  • Resolutions — Up to 4K60 4:4:4 on the HDMI ports; up to 4K60 4:2:0 on the HDBaseT ports; and up to 1080p60 on the VGA input.
  • System Range for the HDBT inputs and outputs — Up to 100m for 4K; 180m for 1080p.
  • 4x1 USB Switcher — Can be set to follow the switching of the video layer or as an independent switcher.
  • Built–in Power Amplifier — 2x20W.
  • Built–in Video ProcAmp — Color, hue, sharpness, noise, contrast, and brightness.
  • Multiple Control Options — Front panel buttons with OSD, RS–232, Ethernet and built–in Web pages.
  • HDMI Support — HDR10, CEC, xvYCC color (on input), Dolby TrueHD/DTS–HD Master Audio (by–pass), as specified in HDMI 2.0 as specified in HDMI 2.0.
  • Built–in video Proc–Amp — color, hue, sharpness, contrast, and brightness are set individually for each output.
  • An OSD (On–Screen Display) — for making adjustments — that can be located anywhere on the screen.
  • Scaled video outputs — 4 pairs of mirrored HDMI and HDBT outputs.
  • Applications Presentation and multimedia. Projection systems in conference rooms, boardrooms, auditoriums, hotels and churches, production studios, rental and staging. Any application where high quality conversion and switching of multiple and different video signals to graphical data signals is required for display or projection purposes.

    The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

    Inputs 6 HDMI: On female HDMI connectors 1 PC: On a 15–pin HD connector 4 HDBT: On RJ–45 female connectors 8 Stereo Analog Balanced Audio: On 5–pin terminal block connectors 2 Unbalanced Mono Audio: On 3–pin terminal block connectors Outputs 4 HDMI: On female HDMI connectors 4 HDBT (mirrored with each HDMI output): On RJ–45 female connectors 5 Balanced Stereo Audio: On 5–pin terminal block connectors 1 Stereo Balanced Audio: On a 4–pin large terminal block Line Level Input Impedance: 16.6kΩ Maximum level: +14.7dBu (4.2Vrms) Sensitivity: Full power @ +8.7dBu (2.1Vrms) for OUT =1.9Vrms MICROPHONE LEVEL INPUT Impedance: 47kΩ Sensitivity: Full power @ — 37dBu (11mVrms) for OUT =1.9Vrms Phantom Power: 48Vdc on/off per input Line Level Output Impedance: 500Ω Frequency Response: 20Hz — 20kHz @ +/–1dB S/N Ratio: >75dB, 20Hz — 20kHz (unweighted), S/N Ratio: >81dB, 20Hz — 20kHz (A–weighted) Audio THD + Noise: <0.014%, 20Hz — 20kHz (unweighted), Audio THD + Noise: <0.0092%, 20Hz–20kHz (A–weighted) Crosstalk: <–93 dB, 20Hz to 20kHz Amplifier Output Power: 2 x 20W into 4Ω Amplifier Class: D Maximum Voltage Gain: 26dB BTL Dynamic Range: 103 dB A–Weighted Frequency Response: 20Hz — 20kHz @ +/–1dB S/N Ratio: >68 dB, 20Hz — 20kHz (unweighted) Audio THD + Noise: <0.037%, 20Hz — 20kHz (unweighted) Crosstalk: <–77 dB, 20Hz to 20kHz Ports 4 IR (for HDBT Outputs): On terminal block connectors for IR link extension 4 IR (for HDBT Inputs): On terminal block connectors for IR link extension 4 RS-232 (for HDBT Outputs): On terminal block connectors for serial link extension 4 RS-232 (for HDBT Inputs): On terminal block connectors for serial link extension 5 USB: 4 USB Hosts on USB–B connectors 5 USB: 1 USB Client on a USB–A connector 1 USB: On a USB–A connector for firmware upgrading 2 RS-232: On 3–pin terminal block connectors 4 100BaseT Ethernet: On RJ–45 female connectors for device control and LAN extension Video Max Resolution: HDMI: 4K60 4:4:4 Max Resolution: HDBT: 4K60 4:2:0 Max Resolution: PC (VGA):1080p Compliance: Up to HDMI 2.0 and HDCP 2.2 Extended Ethernet Max Transmission Bandwidth: 100Mbps Extended RS-232 Baud Rate: 300 to 115200 Control RS-232 Baud Rate: 115200 Power Max, Power Consumption: 190VA Storage Temperature: –40° to +70°C (–40° to 158°F) Environmental Conditions Operating Temperature: 0° to +40°C (32° to 104°F) Humidity: 10% to 90%, RHL non–condensing Regulatory Compliance (Standards Compliance) Safety: CE, FCC Environmental: RoHs, WEEE Enclosure Size: 19” 2U Type: Aluminum Cooling: Fan ventilation Accessories Included: Power adapter cord Product Dimensions 43.69cm x 23.60cm x 8.80cm (17.20" x 9.29" x 3.46" ) W, D, H Product Weight 5.0kg (11.0lbs) approx. Shipping Dimensions 52.60cm x 47.50cm x 18.40cm (20.71" x 18.70" x 7.24" ) W, D, H Shipping Weight 6.3kg (13.9lbs) approx.

    EL INPUT: Impedance: 47kΩ Sensitivity: Full power @ — 37dBu (11mVrms) for OUT =1.9Vrms Phantom Power: 48Vdc on/off per input Line Level Output Impedance: 500Ω Frequency Response: 20Hz — 20kHz @ +/–1dB S/N Ratio: >75dB, 20Hz — 20kHz (unweighted), S/N Ratio: >81dB, 20Hz — 20kHz (A–weighted) Audio THD + Noise: <0.014%, 20Hz — 20kHz (unweighted), Audio THD + Noise: <0.0092%, 20Hz–20kHz (A–weighted) Crosstalk: <–93 dB, 20Hz to 20kHz Amplifier Output Power: 2 x 20W into 4Ω Amplifier Class: D Maximum Voltage Gain: 26dB BTL Dynamic Range: 103 dB A–Weighted Frequency Response: 20Hz — 20kHz @ +/–1dB S/N Ratio: >68 dB, 20Hz — 20kHz (unweighted) Audio THD + Noise: <0.037%, 20Hz — 20kHz (unweighted) Crosstalk: <–77 dB, 20Hz to 20kHz Ports 4 IR (for HDBT Outputs): On terminal block connectors for IR link extension 4 IR (for HDBT Inputs): On terminal block connectors for IR link extension 4 RS-232 (for HDBT Outputs): On terminal block connectors for serial link extension 4 RS-232 (for HDBT Inputs): On terminal block connectors for serial link extension 5 USB: 4 USB Hosts on USB–B connectors 5 USB: 1 USB Client on a USB–A connector 1 USB: On a USB–A connector for firmware upgrading 2 RS-232: On 3–pin terminal block connectors 4 100BaseT Ethernet: On RJ–45 female connectors for device control and LAN extension Video Max Resolution: HDMI: 4K60 4:4:4 Max Resolution: HDBT: 4K60 4:2:0 Max Resolution: PC (VGA):1080p Compliance: Up to HDMI 2.0 and HDCP 2.2 Extended Ethernet Max Transmission Bandwidth: 100Mbps Extended RS-232 Baud Rate: 300 to 115200 Control RS-232 Baud Rate: 115200 Power Max, Power Consumption: 190VA Storage Temperature: –40° to +70°C (–40° to 158°F) Environmental Conditions Operating Temperature: 0° to +40°C (32° to 104°F) Humidity: 10% to 90%, RHL non–condensing Regulatory Compliance (Standards Compliance) Safety: CE, FCC Environmental: RoHs, WEEE Enclosure Size: 19” 2U Type: Aluminum Cooling: Fan ventilation Accessories Included: Power adapter cord Product Dimensions 43.69cm x 23.60cm x 8.80cm (17.20" x 9.29" x 3.46" ) W, D, H Product Weight 5.0kg (11.0lbs) approx. Shipping Dimensions 52.60cm x 47.50cm x 18.40cm (20.71" x 18.70" x 7.24" ) W, D, H Shipping Weight 6.3kg (13.9lbs) approx.

    VP–554X Firmware Version V2.47