KRAMER KIT-400 4K Auto–Switcher/Scaler Kit over Long–Reach HDBaseT
KIT−400 is a high−performance auto−switcher/scaler kit for 4K HDMI™ and VGA over long−reach HDBaseT. The kit includes the KIT−400T transmitter/switcher and the KIT−400R receiver/scaler. The KIT−400T transmitter converts the user−selected input signal into the transmitted HDBaseT signal. The KIT−400R receiver receives the HDBaseT signal, converts it to HDMI and up− or down−scales the picture to match the resolution of the HDMI monitor.
KIT−400 extends video signals to up to 40m (130ft) over CAT copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions.
Simple and Powerful Maestro Room Automation — Intuitive user interface enables you to fully automate your meeting room elements. Configure lights, shades, devices and more to be activated by an extensive range of triggers, including scheduling, input/output connectivity, routing, and button pressing. By minimizing user intervention, Maestro room automation saves meeting prep time and minimizes human error before presentations.
HDMI Support — HDCP 1.4 / 2.2. 4K60, CEC, xvYCC color (on input).
PoC (Power over Cable) Enabled — Power only one of the units. The other unit of the receiver/transmitter pair is powered via the HDBaseT extension.
2 Local and 1 Remote Source — With auto–switching of the live source to the HDMI display on the output at the receiver. The transmitter has an HDMI and a VGA input, with a dedicated audio jack, and there is an additional HDMI input on the receiver side.
Audio De–embedding — Output the HDMI audio to a balanced stereo output on the receiver side, and an unbalanced stereo output on the transmitter side.
Bidirectional RS–232 Extension — Serial interface data flows in both directions, allowing data transmission and device control.
I–EDIDPro™ Kramer Intelligent EDID Processing™ — Intelligent EDID handling, processing and pass–through algorithm that ensures Plug and Play operation.
Easy Remote Device Control — Control devices connected to KIT–400 from the user–friendly Kramer Aware interface on the KIT–400 embedded webpages. You can also access the interface using the Kramer Aware app on a compatible Kramer touch panel.
Convenient Unit Control and Configuration Options — Local control via front panel source and output switching buttons, DIP–switches for configuring connection priority, and OSD menu. Distance control via user–friendly embedded web pages via Ethernet, Protocol 3000 API, RS–232 serial commands transmitted by a PC, touch screen system or other serial controller and relay switches.
Easy, Cost–effective Maintenance — Local firmware upgrade via USB connector.
Easy and Elegant Installation — Installation is fast and cost–effective via a single CAT cable, providing both video signal and power (PoC) connections. Compact MegaTOOLS™ fan–less enclosure for dropped–ceiling mounting, or side–by–side mounting of 2 units in a 1U rack space with the recommended rack adapter.
Applications Classrooms and lecture halls Meeting rooms Training facilities Collaborative classrooms Any space where BYOD support is required
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
TRANSMITTER Inputs/Outputs INPUTS 2 HDMI: On a female HDMI connectors 1 VGA: On a 15–pin HD connector 1 Unbalanced Audio: On a 3.5mm mini jack OUTPUTS 1 HDBaseT: On an RJ–45 connector 1 Unbalanced Audio: On a 3.5mm mini jack PORTS 1 Ethernet: On an RJ–45 connector 1 Control RS–232: On a 3–pin terminal block connector 1 Data RS–232: On a 3–pin terminal block connector 1 Remote Contact–Closure: On a 5–pin terminal block connector 1 Service USB: On a mini–USB connector for firmware upgrade RECEIVER Inputs/Outputs INPUTS 1 HDBaseT: On an RJ–45 connector 1 HDMI: On female HDMI connectors OUTPUTS 1 HDMI: On female HDMI connectors 1 Balanced Audio: On a 5–pin terminal block connector PORTS 1 Control RS–232: On a 3–pin terminal block connector 1 Data RS–232: On a 3–pin terminal block connector 1 Remote Contact–Closure: On a 4 pin terminal block connector 1 Relay: On a 3–pin terminal block connector 1 Program USB: On a USB–A connector for firmware upgrade Video Max Data Rate (on the HDMI ports): KIT–400R: 18Gbps, KIT–400T: 10.2Gbps Max Resolution (on HDMI ports): KIT–400R: 4K@60Hz (4:4:4), KIT–400T: 4K@60Hz (4:2:0) HDMI Support: 4K60, CEC, xvYCC color Content Protection: HDCP 1.4 and 2.2 (KIT–400R) KIT-400R Output Resolutions: 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz, 1280x768@60Hz, 1280x800@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1200@60Hz RB, 2560x1600@60Hz RB, 1920x1080@60Hz, 1280x720@60Hz, 2048x1080@50/60Hz, 2560x1440@60Hz RB, 720x480p@60Hz, 720x576p@50Hz, 1280x720p@50/60Hz, 1920x1080p@24/25/30/50/60Hz, 2560x1080p@50/60Hz, 2K@24/25/30/50/60Hz, 4K@24/25/30/50/60Hz Extension Line Up to 40m (130ft): At 4K@60Hz (4:2:0) Up to 70m (230ft): At full HD (1080p@60Hz) Extended RS-232 Baud Rate: 300 to 115200 Power Source: 12V DC Combined Consumption of Both Units: 2A (1 unit connected to 12V DC + 1 unit powered by PoC) User Interface Control: Input selection buttons, DIP–switches, remote contact–closure switches, relay switches. Kramer API via RS–232 serial commands transmitted by a PC, touch screen system or other serial controller, embedded web pages via LAN for configuration and control Indicators: Power, link, input selection LEDs Environmental Conditions Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: –40° to +70°C (–40° to 158°F) Humidity: 10% to 90%, RHL non–condensing Enclosure Size: MegaTOOLS® Type: Aluminum Cooling: Convection ventilation STANDARDS COMPLIANCE Safety: CE Environmental: FCC Accessories Included: 1 Power adapter, 8 rubber feet, 2 bracket sets
DS COMPLIANCE: Safety: CE Environmental: FCC Accessories Included: 1 Power adapter, 8 rubber feet, 2 bracket sets
K–Upload Version 1.1.36.0 By downloading this software you agree to the EULA
KIT–400T Firmware Version 03.13.62886 To upgrade the firmware, upload using the webpage or use the USB and K–Upload software KIT–400R Firmware Version 1.29 Please follow upgrade procedure included in the firmware package.
Kramer USB Driver Version 1.0 Supports 32–bit and 64–bit Microsoft Windows XP, Windows 7, Windows 8 operating systems
- KIT–400 User Manual
- KIT–400 Quick Start
- KIT–400R Protocol 3000 Commands
- KIT–400T Protocol 3000 Commands
- KIT–400 Release Notes
- Download INSTALLATION DRAWING (DXF/PDF)
- Download INSTALLATION DRAWING (DXF/PDF)
- DOCUMENTATION KIT–400 Scaling Solutions KIT–400 User Manual KIT–400 Quick Start KIT–400R Protocol 3000 Commands KIT–400T Protocol 3000 Commands
- SOFTWARE K–Upload Version 1.1.36.0 By downloading this software you agree to the EULA
- FIRMWARE KIT–400T Firmware Version 03.13.62886 To upgrade the firmware, upload using the webpage or use the USB and K–Upload software KIT–400R Firmware Version 1.29 Please follow upgrade procedure included in the firmware package.
- DRIVERS Kramer USB Driver Version 1.0 Supports 32–bit and 64–bit Microsoft Windows XP, Windows 7, Windows 8 operating systems
- RELEASE NOTES KIT–400 Release Notes
- [H2] PRODUCT INSTALLATION DRAWING (DXF/PDF)
- Download INSTALLATION DRAWING (DXF/PDF) Download INSTALLATION DRAWING (DXF/PDF)
