KRAMER Z4KC2XS-D ZyPer4K–XSE Copper Decoder
Z4KC2XS−D is an HDMI 2.0 Decoder that is part of the ZyPer4K product line. It supports IP streaming over 10Gbit/copper PoE+ up to 4KP60 4:4:4 resolution with embedded audio and HDCP 2.3 encryption at zero−frame latency. USB supported between ZyPer4K−XS/XR devices. Video compatible with any ZyPer4K Encoder. AC power supply is included but other cables are not. Uncompressed 4K Multiview Video Wall HDMI 2.0 HDCP 2.3 AES Encryption
Video HDMI 2.0 with HDCP pass–through Audio (Digital) Encoded audio formats and linear PCM up to 8 channels Audio (Analog) Balance Stereo (5–pin phoenix) Output Serial (RS232) 3–pin phoenix USB Dual USB 2.0 (USB — A connectors) Note: HID Support Only Ethernet 10 Gb for Video/Audio/Control with 1 Gb Utility Formats Supports all major VESA resolutions and variations including full HDMI 2.0 Support: VGA: 640x480 (4:3) SXGA: 1280x1024 (5:4) 1080p/i: 1920x1080 (16:9) SVGA: 800x600 (4:3) WXGA: 1366x768 (16:9) QXGA: 2048x1536 (4:3) XGA: 1024x768 (4:3) SXGA+: 1440x1080 (4:3) Ultra HD: 3840x2160 (16:9) HDTV: 1280x720 (16:9) UXGA: 1600x1200 (4:3) 4K: 4096x2160 (17:9) Custom resolutions are supported at pixel clock rates up to 600 MHz Video Other Color depth: 24 bit, 30 bit, 36 bit, 48 bit Video Wall and Multiview Video Wall up to 15x15. Multiview with up to 19 sources Signal transmission distance Cat6a: 100m Copy Protection/Security HDCP 2.3, AES–128 Encryption, 802.1X compatible Power input (locking connector) 12V DC Power Approximately 13 watts Temperature Operating temperature: 32 F to 104 F <0 C to +40 C> Storage temperature: — 4 F to +176 F <–20 C to +80 C> Humidity Operating/ Storage: 20% to 90% (Non–Condensing) Accessories Z4KPWRCTR12: ZyPer 12V Power Center for use with up to 8 ZyPer Encoder/Decoders (all models). 1 RU. Includes rack ears, 8 3–foot locking 12V DC power cables, AC power cord Z4KRACKXSE: ZyPer4K–XSE Rack Mount Kit. Holds up to 8 ZyPer4K–XSE Encoders/Decoders in standard 6RU space. Includes rack assembly and 8 carrier units Z4KVESABRK: ZyPer4K VESA Bracket is a custom wall/desk/display mount bracket for ZyPer4K. Supports standard VESA parameters for mounting directly to rear of a display. 100x100, 100x200 and 200x200 VESA hole mounts are supported Product Dimensions 19.50cm x 13.70cm x 4.82cm (7.68" x 5.39" x 1.90" ) W, D, H Product Weight 1.0kg (2.2lbs) approx. Shipping Dimensions 36.60cm x 174.00cm x 8.70cm (14.41" x 68.50" x 3.43" ) W, D, H Shipping Weight 1.8kg (3.9lbs) approx.
Video HDMI 2.0 with HDCP pass–through Audio (Digital) Encoded audio formats and linear PCM up to 8 channels Audio (Analog) Balance Stereo (5–pin phoenix) Output Serial (RS232) 3–pin phoenix USB Dual USB 2.0 (USB — A connectors) Note: HID Support Only Ethernet 10 Gb for Video/Audio/Control with 1 Gb Utility Formats Supports all major VESA resolutions and variations including full HDMI 2.0 Support: VGA: 640x480 (4:3) SXGA: 1280x1024 (5:4) 1080p/i: 1920x1080 (16:9) SVGA: 800x600 (4:3) WXGA: 1366x768 (16:9) QXGA: 2048x1536 (4:3) XGA: 1024x768 (4:3) SXGA+: 1440x1080 (4:3) Ultra HD: 3840x2160 (16:9) HDTV: 1280x720 (16:9) UXGA: 1600x1200 (4:3) 4K: 4096x2160 (17:9) Custom resolutions are supported at pixel clock rates up to 600 MHz Video Other Color depth: 24 bit, 30 bit, 36 bit, 48 bit Video Wall and Multiview Video Wall up to 15x15. Multiview with up to 19 sources Signal transmission distance Cat6a: 100m Copy Protection/Security HDCP 2.3, AES–128 Encryption, 802.1X compatible Power input (locking connector) 12V DC Power Approximately 13 watts Temperature Operating temperature: 32 F to 104 F <0 C to +40 C> Storage temperature: — 4 F to +176 F <–20 C to +80 C> Humidity Operating/ Storage: 20% to 90% (Non–Condensing) Accessories Z4KPWRCTR12: ZyPer 12V Power Center for use with up to 8 ZyPer Encoder/Decoders (all models). 1 RU. Includes rack ears, 8 3–foot locking 12V DC power cables, AC power cord Z4KRACKXSE: ZyPer4K–XSE Rack Mount Kit. Holds up to 8 ZyPer4K–XSE Encoders/Decoders in standard 6RU space. Includes rack assembly and 8 carrier units Z4KVESABRK: ZyPer4K VESA Bracket is a custom wall/desk/display mount bracket for ZyPer4K. Supports standard VESA parameters for mounting directly to rear of a display. 100x100, 100x200 and 200x200 VESA hole mounts are supported Product Dimensions 19.50cm x 13.70cm x 4.82cm (7.68" x 5.39" x 1.90" ) W, D, H Product Weight 1.0kg (2.2lbs) approx. Shipping Dimensions 36.60cm x 174.00cm x 8.70cm (14.41" x 68.50" x 3.43" ) W, D, H Shipping Weight 1.8kg (3.9lbs) approx.
ZyPer4K–XSE Firmware Version 2.2.0.0
- Network Requirements & Security Considerations
- Quick Start Guide
- Installation Best Practices
- XSE STIG RMF Overview
- Z4K–XSE Statement of Volatility
- Z4K–XSE with Dante–Icron Statement of Volatility
- Z4K–XSE Supplier's Declaration of Conformity
- Z4K–XSE Verification of Conformity
- Z4K–XSE EMC Certification
- Z4K–XSE Low Voltage Directive Certification
- Z4K–XSE CB Test Certificate
- DOCUMENTATION User Manual FAQ Brochure Network Requirements & Security Considerations Quick Start Guide Installation Best Practices AVOiP Datasheet Datasheet XSE Update XSE STIG RMF Overview Esports Update Maritime Update Medical Application Secure Application Z4K–XSE Statement of Volatility Z4K–XSE with Dante–Icron Statement of Volatility Z4K–XSE Supplier's Declaration of Conformity Z4K–XSE Verification of Conformity Z4K–XSE EMC Certification Z4K–XSE Low Voltage Directive Certification Z4K–XSE CB Test Certificate
- FIRMWARE ZyPer4K–XSE Firmware Version 2.2.0.0
