KRAMER SL-1N 7–port Serial, IR, and Relay, Ethernet Room Controller
The SL−1N is a master room controller that can operate over Ethernet (LAN) with control ports that include two bidirectional RS−232, two IR and three relay. It controls devices such as scalers, video displays, audio amplifiers, DVD players, sensors, screens, shades, door locks, and lights. Multiple Kramer Ethernet gateways can be used to add remote I/O ports.
The SL−1N includes a KNET™ connector interface which enables access to the master controller from auxiliary room controllers such as control keypads. The SL−1N can also provide power to auxiliary room controllers via the KNET™ connectors.
1 Ethernet Port — Connector for IP–enabled devices and control gateways for adding remote I/O ports
1 K–NET™ Connector — Enables communication between the master controller and auxiliary room controllers such as control keypads
K–NET™ Single Link Connection — Enables a single connection for both power and control to auxiliary controllers
2 RS–232 Bi–directional Control Ports — Serial control protocol for compatible devices
2 IR Emitter Control Ports — Infrared control for compatible devices
3 Relay Control Ports — Contact closure control for actions such as rolling up and down screens, drapes, shades, and blinds
Simultaneous IP Control Communication — With up to 15 IP control clients.
Kramer K–Config™ Compatible — Intuitive Windows–based configuration application for fast and easy design of room control systems
Kramer Site–CTRL™ Compatible — Remote customer site control and management over customer's IP network
IR Sensor and IR Input Ports — Learn commands from IR remotes
Mini USB Port — For firmware upgrades of technical services
Applications Master room controller for room control systems Multimedia room control, such as classrooms and meeting rooms
BIDIRECTIONAL PORTS 2 RS–232 serial on 3–pin terminal blocks, 1 K–NET on 4–pin terminal block connector, 1 Ethernet on an RJ–45 connector, 1 Mini USB connector for local programming services INPUTS 1 built–in IR sensor, 1 IR–in on 3.5mm mini–jack (for learning) OUTPUTS 2 IR–out and 3 relays (36V AC or DC, 2A, 60VAC maximum on non–inductive load) on 2–pin terminal block connectors INDICATORS LED indicator for each port and function POWER CONSUMPTION 12V DC, 180mA OPERATING TEMPERATURE 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE –40° to +70°C (–40° to 158°F) HUMIDITY 10% to 90%, RHL non–condensing INCLUDED ACCESSORIES Power supply Product Dimensions 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H Product Weight 0.2kg (0.4lbs) approx. Shipping Dimensions 49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H Shipping Weight 0.5kg (1.2lbs) approx.
Supply is limited. This item will be discontinued when global inventory is depleted.
AL PORTS: 2 RS–232 serial on 3–pin terminal blocks, 1 K–NET on 4–pin terminal block connector, 1 Ethernet on an RJ–45 connector, 1 Mini USB connector for local programming services INPUTS 1 built–in IR sensor, 1 IR–in on 3.5mm mini–jack (for learning) OUTPUTS 2 IR–out and 3 relays (36V AC or DC, 2A, 60VAC maximum on non–inductive load) on 2–pin terminal block connectors
RS LED: indicator for each port and function
ER CONSUMPTION: 12V DC, 180mA
NG TEMPERATURE: 0° to +40°C (32° to 104°F)
GE TEMPERATURE: –40° to +70°C (–40° to 158°F) HUMIDITY 10% to 90%, RHL non–condensing
ED ACCESSORIES: Power supply Product Dimensions 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H Product Weight 0.2kg (0.4lbs) approx. Shipping Dimensions 49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H Shipping Weight 0.5kg (1.2lbs) approx.
Supply is limited. This item will be discontinued when global inventory is depleted.
K Config Configuration Software Version 1.0.0.70 New Configuration software for the SummitView™ devices. Please note that the K–Config is not backward compatible — KPR project created in RC–SV Configuration software will not open in the K–Config. Please note that some features of this software don't work on 64–bit operating systems K–Config Configuration Software Version 3.6.13.0 Configuration software for Room Controllers. Please refer to Release Notes for Known Issues, and note K–Config is not backward compatible with RC–SV Configuration software. By downloading this software you agree to the EULA Site–CTRL Version 2.0.31.0 By downloading this software you agree to the EULA
SL–1N Firmware Version 4.0.49.62807
K–Config–2 Drivers Version 1.2 K Config XML Files Of Kramer Control Products Version 2.5 K–Config devices XML files. Please refer to K–Config Release Notes for Known Issues. Kramer USB Driver Version 1.0 Supports 32–bit and 64–bit Microsoft Windows XP, Windows 7, Windows 8 operating systems
Download DXF (BLOCK DIAGRAM)
- Virtual Device Build Guidelines
- K–Config 2 User Manual
- K–Config 3 User Manual
- SL–1N User Manual
- SL–1N Quick Start
- TOOL Bracket Installation Manual
- SL–1N Release Note
- Download DXF (BLOCK DIAGRAM)
- DOCUMENTATION Virtual Device Build Guidelines K–Config 2 User Manual K–Config 3 User Manual SL–1N User Manual SL–1N Quick Start TOOL Bracket Installation Manual
- SOFTWARE K Config Configuration Software Version 1.0.0.70 New Configuration software for the SummitView™ devices. Please note that the K–Config is not backward compatible — KPR project created in RC–SV Configuration software will not open in the K–Config. Please note that some features of this software don't work on 64–bit operating systems K–Config Configuration Software Version 3.6.13.0 Configuration software for Room Controllers. Please refer to Release Notes for Known Issues, and note K–Config is not backward compatible with RC–SV Configuration software. By downloading this software you agree to the EULA Site–CTRL Version 2.0.31.0 By downloading this software you agree to the EULA
- FIRMWARE SL–1N Firmware Version 4.0.49.62807
- DRIVERS K–Config–2 Drivers Version 1.2 K Config XML Files Of Kramer Control Products Version 2.5 K–Config devices XML files. Please refer to K–Config Release Notes for Known Issues. Kramer USB Driver Version 1.0 Supports 32–bit and 64–bit Microsoft Windows XP, Windows 7, Windows 8 operating systems
- RELEASE NOTES SL–1N Release Note
- [H2] PRODUCT DXF (BLOCK DIAGRAM)
