KRAMER MTX3-88-PR-PRO 8x8 4K60 All in one Hybrid Presentation Matrix
MTX3−88−PR−PRO is a high−performance video processing and fast−switching scaling matrix, with independent audio−visual (AV) and USB routing. The matrix has unmatched flexibility with USB−C, HDMI, HDBaseT 3.0 ports, air−casting inputs and network stream output.
The unit is enhanced with audio capabilities including an integrated DSP, integrated dual−zone power amplifier, DANTE and USB audio routing.
The flexibility and processing power of the MTX3−88−PR−PRO makes it a perfect system for numerous deployment scenarios.
Premium All–in–one Matrix — High–resolution scaling matrix with multi–signal routing of wired and wireless user interfaces.
Dual–screen USB–C routing capability allowing to connect any Alt–mode DP capable laptop with an extended desktop to be displayed on any selected pair of outputs.
Eight HDBaseT 3.0 extension ports with PoE remote device powering. Each HDBaseT 3.0 port has configurable direction (input or output) and can extend multi–signals over twisted–pair copper infrastructures for un–matched system flexibility.
Advance video processing capabilities with several Multiview presentation layouts and two independent video wall presentations.
Rich set of audio interface options including analog (line, microphone and speaker), Dante and USB audio devices.
A sophisticated audio DSP configured by an intuitive graphic dash–board style user interface. The audio DSP allows mixing, condensing, expanding, noise filtering and echo cancelling to ensure echo–free, noise–free, and crystal–clear sound distribution.
Fast <1sec AV Routing — Clean and instantaneous routing between matrix inputs and outputs, with smooth and uninterrupted transition between presented content on local and remote displays.
Hybrid–meeting Collaborative Sessions — Controllable multi–signals routing of both AV and USB host inputs. AV and USB routing may be performed independently or in USB–follow–AV mode.
Six local USB device ports divisible into two groups for enhanced host — device USB routing flexibility.
60W charging for USB–C connected devices.
High–Performance Scaling Experience — Built–in ProcAmp & high–resolution scaling technology for optimal up — or down image scaling.
Open Standard Streaming and Recording — Session content sharing and recording via the popular H264/5 open streaming standard over IT Lan and WAN networks.
Room Control — Includes gateways and a rich set of relays, RS–232 and GPIOs to reduce the systems complexity offering the end–user a smooth and sophisticated room control experience.
Standard Enterprise–Grade Secured Operation — Standard IT–grade authentication for secured IT LAN connectivity, and secured web–UI browsing and communication, with OWASP–10 (Open Web Application Security Project) standard penetration protection certification.
Comprehensive Management — Local panel buttons operation, remote and secured management via integrated user–friendly web–UI server, and remote via IP–driven API control and management communication, for flexible service options and ensure lasting, field proven deployment.
Applications Enterprise divisible conference halls, boardrooms, and large training centers. Education lecture halls and auditoriums. Governmental large facilities, such as court rooms and visitor centers. Any fast–switching content sharing and hybrid sessions in large–space facilities.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Inputs 2 Full-featured USB-C: On USB type–C female connectors 8 HDMI: On HDMI female connectors 1 Air-cast Wi-Fi: On a 2xRF antenna female connectors 4 Analog Mic or 2 Balanced Stereo Audio: On 3–pin terminal block connectors 4 Analog Balanced Stereo Audio: On 5–pin terminal block connectors Outputs 8 HDMI: On HDMI female connectors 1 H.264/5 Encoder: On a USB type–C female connector for recording 8 Analog Audio Balanced Stereo Line Level: On 5–pin terminal block connectors 8 Dante Streaming Channels: On an RJ–45 female LAN connectors 2 Power Amplifier Audio Stereo Line: On 4–pin large terminal block connectors 2 Power Amplifier Audio Stereo Line: Note: On MTX3–88–PR–PRO model only 4 IR: On 2–pin terminal block connectors Interchangeable Inputs/Outputs 8 HDBT: On RJ–45 female connectors Ports 3 1000BaseT Ethernet: On RJ–45 female connectors for LAN connection & extension 1 100BaseT Ethernet: On an RJ–45 female connector for LAN connection and management 4 USB 3.2 Device: On USB type–A female connectors 2 USB 3.2 Device: On USB type–C female connectors 1 USB 2.0 Device: On a USB type–C female connector for monitoring & recording 4 RS-232: On 3–pin terminal block connectors 4 SPDT Relay: On 3–pin terminal block connectors 4 GPIO: On 2–pin terminal block connectors Video Max Bandwidth: 18Gbps (6Gbps per graphic channel) Max Resolution: 4K@60Hz 4:4:4 24bpp resolution Content Protection: HDCP 2.3 Compliance: HDMI 2.0b Video Performance Scaling: Up, down or cross–scaling Minimum Resolution: 480p Max Resolution: 4K@60Hz 4:4:4 24bpp resolution 1sec: Max Switching Time Max Latency: 2 video frames Multi View Window Layouts: PiP, Side–by–side, Split Video Wall Output Wall Layout: 2x2 Max Video Walls: 2 USB Max USB 3.2 Data Rate: 10Gbps Integrated USB Hubs (layers): 2 USB Devices Groups: 2 Standards Compliance: USB 3.2 GEN 2, 2.0 and 1.1 USB-C AV Compliance: MST DP 1.4a Alt Mode Max AV Resolution: 4K60Hz 4:4:4 24bpp Max Input AV Streams: 2 USB Compliance : 3.2 Gen 2 Max USB 3.2 Data Rate : 10Gbps Charging Compliance : PD 3.0 Max Charging Power : 60W per port Extension Line Direction: Transmit or receive (per port) Reach: Up to 100m (330ft) Reach: Note: When using Kramer HDBaseT cables PoE+ Providing: 30W per 802.3at Type 2 Standards Compliance: HDBaseT 3.0 Extended USB Max USB 2.0 Data Rate: 480Mbps Max Transmitted Data Bandwidth: 300Mbps Standards Compliance: USB 2.0 and 1 Extended Ethernet Max Data Rate: 1 Gbps Extended RS-232 Baud Rate: 1200 to 115200 Air-cast Wi-Fi Max Resolution: 4K@60Hz 4:2:0 resolution Max Antenna Coax Cable Reach: 20m Max Air-cast Connection Reach: 10m for device–connected antennas Max Air-cast Connection Reach: 5m for coax–connected antennas Max Air-cast Connection Reach: Note: At free line–of–sight connection Max Connection Time: 3sec Max Presentation Latency: 130msec Standards Compliance: 802.11ac Radio Frequency Bands: 5GHz Content Sharing Applications: Point–to–Point: Miracast Content Sharing Applications: IT Wi–Fi Access Point: Air–Play, Chromecast Network Streamed Video Max Resolution: 4K@60Hz 4:2:0 resolution Max Latency: 130msec Standards Compliance: H.264, H.265 Analog Audio Input Impedance: Balanced: 20kΩ Impedance: Unbalanced: 10kΩ Nominal Level: Balanced: +4dBu Nominal Level: Unbalanced: — 10dBV Nominal Level: Note: Adjustable via input gain Max Level: >+21dBu Max Level: Note: At rated THD+N CMRR: >70dB typical Input Gain Adjustment: –20dB to +10dB, in 0.5dB steps Microphone Input Signal Type: Balanced: Condenser (with phantom power) Signal Type: Unbalanced: Dynamic Impedance: Balanced: 20kΩ Impedance: Unbalanced: 10kΩ Nominal Level: –60dBV Nominal Level: Note: Adjustable via input gain Max Level: Condenser: — 18dBu Max Level: Dynamic: — 36dBV Equivalent Input Noise: <–120dBV (1.0 µVrms) Equivalent Input Noise: Note: At +40dB input gain CMRR: >70dB typical Input Gain Adjustment: –30dB to +24dB, in 0.5dB steps Input Gain Adjustment: Note: Adjustable per input DC Phantom Power: +48 VDC Analog Audio Output Impedance: Balanced: 100Ω Impedance: Unbalanced: 50Ω Gain: Balanced: 0dB Gain: Unbalanced: — 6dB Gain Error: ±0.1dB Gain Error: Note: Channel to channel Max Level: Balanced: +21dBu Max Level: Unbalanced: +15dBu Output Volume Range: –90dB to +10dB, in 0.5dB steps THD + Noise : <0.01%, 20Hz to 20kHz THD + Noise : Note: At maximum level Frequency Response: : 20Hz to 20kHz, ±0.1 dB Dynamic Range: 102dB typical Dynamic Range: Note: 20Hz to 20kHz unweighted S/N Ratio: >90dB, 20Hz to 20kHz S/N Ratio: Note: At maximum balanced output (unweighted) Crosstalk: ≤–90dB @ 20Hz to 20kHz Crosstalk: Note: Fully loaded Power Amplified Audio Note: On MTX3–88–PR–PRO model only Number of amplifiers: 2x 240W power amplifiers Amplifier Type: Class D Lo-Z Stereo Output Impedance: 4Ω or 8Ω Hi-Z Mono Output Voltage: 70V or 100V Port Output Power (per amplifier): Lo–Z: 2x120W @ 4Ω or 8Ω Port Output Power (per amplifier): Hi–Z: 1x240W @70V or 100V Max Voltage Gain: 26dB SE / 32dB BTL Dynamic Range: 119dB Frequency Response: 20Hz to 20kHz, ±0.1 dB S/N Ratio: 80dB — 10dBV, 20Hz to 20kHz Network Streamed Audio Stream Compliance: Dante or AES67 Dante Sample Rates: 44.1 ,48 (default), 88.2, 96kHz AES67 Sample Rate: 48kHz (default), 96kHz Security Web-UI Communication: HTTPS User Access: Multiple roles and credentials IT LAN Authentication: 802.1x Penetration Protection Certification: OWASP–10 Power Source: 85–240V AC Max Consumption: 1110W Max Power Providing Per HDMI Port: 2.5W ( [email protected] ) Max PoE Providing Power Per HDBT Port: 30W HDBT PoE Providing Compliance: 802.3at, Type 2 Max USB-C Charging Power Per USB-C Port: 60W USB-C Charging Compliance: PD 3.0 Max USB Device Per Port Charging Power: 5W (5V@1A) Environmental Conditions Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: –40° to +70°C (–40° to 158°F) Humidity: 10% to 90%, RHL non–condensing Regulatory Compliance (Standards Compliance) Safety: CE, FCC, UL Environmental: RoHs, WEEE Enclosure Size: 19” 3U Type: Aluminum Cooling: Fan Ventilation Max Fan Noise: 40dBA General Net Dimensions (W, D, H): 44cm x 38cm x 13.3cm Net Dimensions (W, D, H): (17.4" x 15" x 5.3") Accessories Included: 2 Power cords, 1 multi–signal USB–C cable (1m), 2 antennas, 2 fuses, 1 set of rack ears Product Dimensions 19" x 9.33 x 3U (43.6cm x 23.70cm x 13.25cm) W, D, H Product Weight 10.7kg (23.6lbs) approx. Shipping Dimensions 58.00cm x 49.30cm x 26.20cm (22.83" x 19.41" x 10.31" ) W, D, H Shipping Weight 14.6kg (32.1lbs) approx.
B-C AV: Compliance:
ST DP: 1.4a Alt Mode Max AV Resolution: 4K60Hz 4:4:4 24bpp Max Input AV Streams: 2 USB Compliance : 3.2 Gen 2 Max USB 3.2 Data Rate : 10Gbps Charging Compliance : PD 3.0 Max Charging Power : 60W per port Extension Line Direction: Transmit or receive (per port) Reach: Up to 100m (330ft) Reach: Note: When using Kramer HDBaseT cables PoE+ Providing: 30W per 802.3at Type 2 Standards Compliance: HDBaseT 3.0 Extended USB Max USB 2.0 Data Rate: 480Mbps Max Transmitted Data Bandwidth: 300Mbps Standards Compliance: USB 2.0 and 1 Extended Ethernet Max Data Rate: 1 Gbps Extended RS-232 Baud Rate: 1200 to 115200 Air-cast Wi-Fi Max Resolution: 4K@60Hz 4:2:0 resolution Max Antenna Coax Cable Reach: 20m Max Air-cast Connection Reach: 10m for device–connected antennas Max Air-cast Connection Reach: 5m for coax–connected antennas Max Air-cast Connection Reach: Note: At free line–of–sight connection Max Connection Time: 3sec Max Presentation Latency: 130msec Standards Compliance: 802.11ac Radio Frequency Bands: 5GHz Content Sharing Applications: Point–to–Point: Miracast Content Sharing Applications: IT Wi–Fi Access Point: Air–Play, Chromecast Network Streamed Video Max Resolution: 4K@60Hz 4:2:0 resolution Max Latency: 130msec Standards Compliance: H.264, H.265 Analog Audio Input Impedance: Balanced: 20kΩ Impedance: Unbalanced: 10kΩ Nominal Level: Balanced: +4dBu Nominal Level: Unbalanced: — 10dBV Nominal Level: Note: Adjustable via input gain Max Level: >+21dBu Max Level: Note: At rated THD+N CMRR: >70dB typical Input Gain Adjustment: –20dB to +10dB, in 0.5dB steps Microphone Input Signal Type: Balanced: Condenser (with phantom power) Signal Type: Unbalanced: Dynamic Impedance: Balanced: 20kΩ Impedance: Unbalanced: 10kΩ Nominal Level: –60dBV Nominal Level: Note: Adjustable via input gain Max Level: Condenser: — 18dBu Max Level: Dynamic: — 36dBV Equivalent Input Noise: <–120dBV (1.0 µVrms) Equivalent Input Noise: Note: At +40dB input gain CMRR: >70dB typical Input Gain Adjustment: –30dB to +24dB, in 0.5dB steps Input Gain Adjustment: Note: Adjustable per input DC Phantom Power: +48 VDC Analog Audio Output Impedance: Balanced: 100Ω Impedance: Unbalanced: 50Ω Gain: Balanced: 0dB Gain: Unbalanced: — 6dB Gain Error: ±0.1dB Gain Error: Note: Channel to channel Max Level: Balanced: +21dBu Max Level: Unbalanced: +15dBu Output Volume Range: –90dB to +10dB, in 0.5dB steps THD + Noise : <0.01%, 20Hz to 20kHz THD + Noise : Note: At maximum level Frequency Response: : 20Hz to 20kHz, ±0.1 dB Dynamic Range: 102dB typical Dynamic Range: Note: 20Hz to 20kHz unweighted S/N Ratio: >90dB, 20Hz to 20kHz S/N Ratio: Note: At maximum balanced output (unweighted) Crosstalk: ≤–90dB @ 20Hz to 20kHz Crosstalk: Note: Fully loaded Power Amplified Audio Note: On MTX3–88–PR–PRO model only Number of amplifiers: 2x 240W power amplifiers Amplifier Type: Class D Lo-Z Stereo Output Impedance: 4Ω or 8Ω Hi-Z Mono Output Voltage: 70V or 100V Port Output Power (per amplifier): Lo–Z: 2x120W @ 4Ω or 8Ω Port Output Power (per amplifier): Hi–Z: 1x240W @70V or 100V Max Voltage Gain: 26dB SE / 32dB BTL Dynamic Range: 119dB Frequency Response: 20Hz to 20kHz, ±0.1 dB S/N Ratio: 80dB — 10dBV, 20Hz to 20kHz Network Streamed Audio Stream Compliance: Dante or AES67 Dante Sample Rates: 44.1 ,48 (default), 88.2, 96kHz AES67 Sample Rate: 48kHz (default), 96kHz Security Web-UI Communication: HTTPS User Access: Multiple roles and credentials
IT LAN: Authentication: 802.1x Penetration Protection Certification: OWASP–10 Power Source: 85–240V AC Max Consumption: 1110W Max Power Providing Per HDMI Port: 2.5W ( [email protected] ) Max PoE Providing Power Per HDBT Port: 30W HDBT PoE Providing Compliance: 802.3at, Type 2 Max USB-C Charging Power Per USB-C Port: 60W USB-C Charging Compliance: PD 3.0 Max USB Device Per Port Charging Power: 5W (5V@1A) Environmental Conditions Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: –40° to +70°C (–40° to 158°F) Humidity: 10% to 90%, RHL non–condensing Regulatory Compliance (Standards Compliance) Safety: CE, FCC, UL Environmental: RoHs, WEEE Enclosure Size: 19” 3U Type: Aluminum Cooling: Fan Ventilation Max Fan Noise: 40dBA General Net Dimensions (W, D, H): 44cm x 38cm x 13.3cm Net Dimensions (W, D, H): (17.4" x 15" x 5.3") Accessories Included: 2 Power cords, 1 multi–signal USB–C cable (1m), 2 antennas, 2 fuses, 1 set of rack ears Product Dimensions 19" x 9.33 x 3U (43.6cm x 23.70cm x 13.25cm) W, D, H Product Weight 10.7kg (23.6lbs) approx. Shipping Dimensions 58.00cm x 49.30cm x 26.20cm (22.83" x 19.41" x 10.31" ) W, D, H Shipping Weight 14.6kg (32.1lbs) approx.
- IP Address Acquiring Technical Note 2024
- MTX3–88–PR–PRO Quick Start
- MTX3–88–PR–PRO User Manual
- DOCUMENTATION IP Address Acquiring Technical Note 2024 MTX3–88–PR–PRO Quick Start MTX3–88–PR–PRO User Manual
