KRAMER KDS-8F Zero Latency 4K HDR SDVoE Video Streaming Transceiver over Fiber Optic
KDS−8F is a high−performance, zero latency, 4K@60Hz (4:4:4) video streaming transceiver for streaming via Ethernet over single−mode and multi−mode optical fiber. KDS−8F can be set as either an encoder or decoder. As an encoder, it encodes and streams the HDMI or DisplayPort input along with IR, RS−232, analog audio and USB, over an IP network. As a decoder, it receives the encoded signal and decodes it for output. High–Performance Video Streaming Transceiver — Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface, providing lossless compression. Maximum Compatibility — Fully standard and compliant SDVoE™ codec, enables compatibility with other software and hardware streaming platforms. HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support. High–Speed 10G Network Switch — Managed switch provides multicast, jumbo frames, IGMP snooping and fast leave. Analog Audio Embedding — Provides an unbalanced analog audio port for embedding audio into the streaming signal. Bi–directional USB over IP. Bi–directional IR and RS–232 over IP — Control an IR or serial device located on the decoder side from the encoder and vice versa. Video Wall Support. Multiview Support. Easy, Cost–Effective Maintenance — LED indicators for main power, Tx/Rx mode setting, HDMI/ DisplayPort video source detection, USB connection and Tx and Rx transmission enable easy local maintenance and troubleshooting. Simple System Management — Remote system management support to enable quick and efficient remote system and device life–cycle management.
Applications Medical facilities and hospitals Government facilities Live entertainment Control centers Large scale matrixes
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Inputs 1 HDMI: On a female HDMI connector 1 DisplayPort: On a female DisplayPort connector 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack Outputs 1 HDMI: On a female HDMI connector 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack Ports 1 SFP+ Fiber: On LC connector(s) for 10GbE Ethernet (MM SFP+ transceiver module included) 1 Unbalanced Stereo Audio: On a 3.5mm mini jack 1 1GbE Ethernet: On an R–J45 connector 1 RS-232: On a 3–pin terminal block connector 3 USB: On female USB type–A connectors 1 USB: On a USB mini connector Video Standards Compliance: 10/12–bit HDR (Point–to–Point and Genlock mode only), HDCP 2.2 &1.4, DVI 1.0, Extension Line Signal Compression: Ultra–light compression, lossless for most content Maximum Range in Point–To–Point Mode: Using OM3 multi–mode fiber — 300m (980ft) / Using OM4 multi–mode fiber — 550m (1800ft) / Using single–mode fiber — 30km (18.6 miles) Audio Standards Compliance: Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources Power Source: 12V DC Consumption: 1A Accessories Included: Power adapter, multimode SFP+ transceiver module, rubber feet Optional: Single–mode SFP+ transceiver module Environmental Conditions Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing Humidity: 10% to 90%, non–condensing Product Dimensions 20.00cm x 23.10cm x 2.50cm (7.87" x 9.09" x 0.98" ) W, D, H Product Weight 1.9kg (4.2lbs) approx. Shipping Dimensions 39.00cm x 20.20cm x 6.20cm (15.35" x 7.95" x 2.44" ) W, D, H Shipping Weight 1.6kg (3.4lbs) approx.
R/T IR: receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5
R/T IR: emitter cable 2m, and a 3.5mm mini jack Outputs 1 HDMI: On a female HDMI connector 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5
R/T IR: receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5
R/T IR: emitter cable 2m, and a 3.5mm mini jack Ports 1 SFP+ Fiber: On LC connector(s) for 10GbE Ethernet (MM SFP+ transceiver module included) 1 Unbalanced Stereo Audio: On a 3.5mm mini jack 1 1GbE Ethernet: On an R–J45 connector 1 RS-232: On a 3–pin terminal block connector 3 USB: On female USB type–A connectors 1 USB: On a USB mini connector Video Standards Compliance: 10/12–bit HDR (Point–to–Point and Genlock mode only), HDCP 2.2 &1.4, DVI 1.0, Extension Line Signal Compression: Ultra–light compression, lossless for most content Maximum Range in Point–To–Point Mode: Using OM3 multi–mode fiber — 300m (980ft) / Using OM4 multi–mode fiber — 550m (1800ft) / Using single–mode fiber — 30km (18.6 miles) Audio Standards Compliance: Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources Power Source: 12V DC Consumption: 1A Accessories Included: Power adapter, multimode SFP+ transceiver module, rubber feet Optional: Single–mode SFP+ transceiver module Environmental Conditions Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing Humidity: 10% to 90%, non–condensing Product Dimensions 20.00cm x 23.10cm x 2.50cm (7.87" x 9.09" x 0.98" ) W, D, H Product Weight 1.9kg (4.2lbs) approx. Shipping Dimensions 39.00cm x 20.20cm x 6.20cm (15.35" x 7.95" x 2.44" ) W, D, H Shipping Weight 1.6kg (3.4lbs) approx.
- KDS–8F Quick Start
- KDS–8, KDS–8F User Manual
- KDS–8F Release Notes
- DOCUMENTATION KDS–8F Quick Start KDS–8, KDS–8F User Manual
- RELEASE NOTES KDS–8F Release Notes
