KRAMER KDS-8 Zero Latency 4K HDR SDVoE Video Streaming Transceiver over Copper
KDS−8 is a high−performance, zero latency, 4K@60Hz (4:4:4) video streaming transceiver for streaming via Ethernet over copper cable. KDS−8 can be set as either an encoder or decoder. As an encoder, it encodes and streams the HDMI input along with IR, RS−232, and analog audio, over an IP network. As a decoder, it receives the encoded signal and decodes it for output. High–Performance Video Streaming Transceiver — Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface, providing lossless compression. Maximum Compatibility — Fully standard and compliant SDVoE™ codec, enables compatibility with other software and hardware streaming platforms. Streamlined Management and Configuration — Kramer KDS–8–MNGR device (sold separately) provides a central point of management and enables creating multiple virtual matrices, video walls and multi–view configurations. In addition, KDS–8–MNGR supports preset configurations that can be activated using Kramer Control. HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support High–Speed 10G Network Switch — Managed switch provides: multicast, jumbo frames, IGMP snooping and fast leave. Analog Audio Embedding — Provides an unbalanced analog audio port for embedding audio into the streaming signal. Bi–directional IR over IP — Control an IR device located on the decoder side from the encoder and vice versa. Bi–directional RS–232 over IP — Control a serial device located on the decoder side from the encoder and vice versa. Video Wall Support. Multiview Support Easy, Cost–Effective Maintenance — LED indicators for main power, Tx/Rx mode setting, HDMI video source detection, and Tx and Rx transmission enable easy local maintenance and troubleshooting. Simple System Management — Remote system management support to enable quick and efficient remote system and device life–cycle management.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Inputs 1 HDMI: On a female HDMI connector 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack Outputs 1 HDMI: On a female HDMI connector 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack Ports 1 10GbE Ethernet: On an R–J45 connector 1 Unbalanced Stereo Audio: On a 3.5mm mini jack 1 1GbE Ethernet: On an R–J45 connector 1 RS-232: On a 3–pin terminal block connector Video Standards Compliance: 10/12–bit HDR (Point–to–Point and Genlock mode only), HDCP 2.2 &1.4, DVI 1.0, Extension Line Signal Compression: Ultra–light compression, lossless for most content Range: Up to 100m in point–to–point mode Audio Standards Compliance: Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources. Analog audio supports 20 Hz~20 kHz, 24–bit 48 kHz sampling rates Power Source: 12V DC Consumption: 3A PoE Budget: 25W (not including cable loss) Environmental Conditions Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing Humidity: 10% to 90%, non–condensing Product Dimensions 23.10cm x 11.60cm x 2.50cm (9.09" x 4.57" x 0.98" ) W, D, H Product Weight 0.5kg (1.1lbs) approx. Shipping Dimensions 39.00cm x 20.20cm x 6.20cm (15.35" x 7.95" x 2.44" ) W, D, H Shipping Weight 1.2kg (2.6lbs) approx.
R/T IR: receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5
R/T IR: emitter cable 2m, and a 3.5mm mini jack Outputs 1 HDMI: On a female HDMI connector 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5
R/T IR: receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5
R/T IR: emitter cable 2m, and a 3.5mm mini jack Ports 1 10GbE Ethernet: On an R–J45 connector 1 Unbalanced Stereo Audio: On a 3.5mm mini jack 1 1GbE Ethernet: On an R–J45 connector 1 RS-232: On a 3–pin terminal block connector Video Standards Compliance: 10/12–bit HDR (Point–to–Point and Genlock mode only), HDCP 2.2 &1.4, DVI 1.0, Extension Line Signal Compression: Ultra–light compression, lossless for most content Range: Up to 100m in point–to–point mode Audio Standards Compliance: Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources. Analog audio supports 20 Hz~20 kHz, 24–bit 48 kHz sampling rates Power Source: 12V DC Consumption: 3A PoE Budget: 25W (not including cable loss) Environmental Conditions Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing Humidity: 10% to 90%, non–condensing Product Dimensions 23.10cm x 11.60cm x 2.50cm (9.09" x 4.57" x 0.98" ) W, D, H Product Weight 0.5kg (1.1lbs) approx. Shipping Dimensions 39.00cm x 20.20cm x 6.20cm (15.35" x 7.95" x 2.44" ) W, D, H Shipping Weight 1.2kg (2.6lbs) approx.
KDS–8 Firmware Version 4.1.1.0 Upgrade procedure described in the Release Notes.
- KDS–8 Quick Start
- KDS–8, KDS–8F User Manual
- KDS–8 Release Notes
- DOCUMENTATION KDS–8 Quick Start KDS–8, KDS–8F User Manual
- FIRMWARE KDS–8 Firmware Version 4.1.1.0 Upgrade procedure described in the Release Notes.
- RELEASE NOTES KDS–8 Release Notes
