KRAMER 676T 4K60 4:4:4 HDMI and RS–232 Transmitter over Ultra–Reach MM/SM Fiber Optic
676T is a high−performance HDMI fiber transmitter for ultra−reach extension of 4K@60Hz (4:4:4) HDMI signals. 676T converts the HDMI and RS−232 input signal to an optical signal that is transmitted over a fiber optic cable to a compatible receiver that converts it back to HDMI and RS−232 signals. 676T includes a multi−mode SFP+ transceiver, but can be used with any Kramer certified SFP+ transceiver, such as a single−mode SFP+ transceiver.
High Performance Standard Fiber Extender — HDMI fiber transmitter for providing ultra–reach signals over either multi–mode or single–mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units (multi–mode SFP+ included). Near–zero latency video chroma sub–sampling conversion technology, is employed to auto–adapt above 10G HDMI signals to 10G optical link signal data–rate.
Note: To ensure specified performance, support, and warranty of this product, use only Kramer's certified hi–performance OSP SFP+ pluggable optical units.
Multi–drop Signal Distribution — Use optical splitters to extend the input signals from a single transmitter to multiple receivers, for displaying the same content on multiple display devices using optical splitting only, with no need for AV distribution amplifiers.
HDMI Signal Extension — HDCP 2.2 compliant and supports up to 18G (6G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS–HD as specified in HDMI 2.0.
Power Saving — With CEC ON/OFF function, shut down a display device automatically when not in use, and auto power it ON upon presentation start.
I–EDIDPro™ Kramer Intelligent EDID Processing™ — Intelligent EDID handling, processing and pass–through algorithm that ensures Plug and Play operation for HDMI source and display systems.
Bidirectional RS–232 Extension — Serial interface data flows in both directions, to enable data transmission and control of devices.
Cost–Effective Maintenance — Status LED indicators for power, source, sink and fiber link connections detection facilitate easy local troubleshooting.
Easy Installation — DigiTOOLS® rack mountable fan–less enclosure enables side–by–side mounting of 3 units in a 1U rack space with the recommended rack adapter.
676T is a high−performance HDMI fiber transmitter for ultra−reach extension of 4K@60Hz (4:4:4) HDMI signals. 676T converts the HDMI and RS−232 input signal to an optical signal that is transmitted over a fiber optic cable to a compatible receiver that converts it back to HDMI and RS−232 signals. 676T includes a multi−mode SFP+ transceiver, but can be used with any Kramer certified SFP+ transceiver, such as a single−mode SFP+ transceiver.
Applications Highly secured and ultra–long extension of controllable AV signals for: governmental, medical, and rental and staging applications. Point–to–multipoint optical distribution of controllable AV signals over large spaces. Multipoint–to–multipoint optical distribution of controllable AV signals over large spaces using Kramer modular matrices. Ultra–long signals extension for multi–room and inter–building connectivity.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Inputs HDMI: On a female HDMI connector Outputs Fiber Optic: On LC connector(s) Ports RS-232: On a 3–pin terminal block connector USB: On a female micro USB connector for firmware upgrade Video Max Bandwidth: 18Gbps Max Resolution: 4096x2160@60Hz 4K@60 (4:4:4) Compliance: HDMI 2.0 and HDCP 2.2 Extension Line Optical Fiber: Multi–mode (MM) or single–mode (SM) Optical Module: Kramer 10Gbps SFP+ IEEE 802.3ae compliant modules (MM is included) Multi-mode Line Compliance: G.651.1 OFNR fiber Max Reach over OM3 MM Fiber: 3km (1.8 miles) Single-mode Line Compliance: G.652D OFNR fiber Max Reach over OS1 SM Fiber: 33km (20.5 miles) STANDARDS COMPLIANCE Laser Safety Compliance: Class 1 SFP Regulatory Certifications : FDA CDRH 21 CFR 1040 and Laser Notice No. 50, UL and CUL EN60950–2:2007, RoHS6, EMC EN 55022 and EN 55024, IEC 62368–1 and IEC 60825–1 and — 2 Extended RS-232 Baud Rate: 300 to 115200 User Interface Indicators: Source detection, sink detection, optical link and power LEDs Controls: Reset button Power Consumption: 480mA Source: 12V DC, 2A Environmental Conditions Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: –40° to +70°C (–40° to 158°F) Humidity: 10% to 90%, RHL non–condensing Regulatory Compliance (Standards Compliance) Safety: CE, UL Environmental: RoHs, WEEE Enclosure Size: Tool Type: Aluminum Cooling: Convection ventilation Accessories Included: MM SFP+ transceiver, power adapter, power cord, mounting bracket set Product Dimensions 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H Product Weight 0.2kg (0.5lbs) approx. Shipping Dimensions 15.70cm x 12.00cm x 8.70cm (6.18" x 4.72" x 3.43" ) W, D, H Shipping Weight 0.7kg (1.6lbs) approx.
G.651.1 OFNR: fiber Max Reach over
M3 MM: Fiber: 3km (1.8 miles) Single-mode Line Compliance:
G.652D OFNR: fiber Max Reach over
S1 SM: Fiber: 33km (20.5 miles)
DS COMPLIANCE: Laser Safety Compliance: Class 1 SFP Regulatory Certifications :
DA CDRH: 21 CFR 1040 and Laser Notice No. 50, UL and CUL EN60950–2:2007, RoHS6,
MC EN: 55022 and EN 55024, IEC 62368–1 and IEC 60825–1 and — 2 Extended RS-232 Baud Rate: 300 to 115200 User Interface Indicators: Source detection, sink detection, optical link and power LEDs Controls: Reset button Power Consumption: 480mA Source: 12V DC, 2A Environmental Conditions Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: –40° to +70°C (–40° to 158°F) Humidity: 10% to 90%, RHL non–condensing Regulatory Compliance (Standards Compliance) Safety: CE, UL Environmental: RoHs, WEEE Enclosure Size: Tool Type: Aluminum Cooling: Convection ventilation Accessories Included: MM SFP+ transceiver, power adapter, power cord, mounting bracket set Product Dimensions 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H Product Weight 0.2kg (0.5lbs) approx. Shipping Dimensions 15.70cm x 12.00cm x 8.70cm (6.18" x 4.72" x 3.43" ) W, D, H Shipping Weight 0.7kg (1.6lbs) approx.
- 676T, 676R Protocol 3000 Commands
- 676T, 676R Quick Start
- Optical Fiber Extension Reach Calculations — Technical Note
- TOOL Bracket Installation Manual
- 676T, 676R Release Notes
- Download INSTALLATION DRAWING (DXF/PDF)
- DOCUMENTATION 676T, 676R Protocol 3000 Commands 676T, 676R Quick Start Optical Fiber Extension Reach Calculations — Technical Note TOOL Bracket Installation Manual
- RELEASE NOTES 676T, 676R Release Notes
- [H2] PRODUCT INSTALLATION DRAWING (DXF/PDF)
